Get a Free Estimate

Keep the Sewer Scope Video File (when the first bid is too high)

Timestamps beat stills in a seller request.

sewerscoped Editorial Team10 min read
In this article

A sewer scope video can provide useful evidence during a home purchase or repair negotiation, but it does not replace a licensed inspection, a written repair proposal, or local professional advice. For general housing information, review HUD.gov. If the property uses a septic system rather than a municipal sewer connection, consult the U.S. EPA septic resources and confirm requirements with local authorities and qualified professionals.

A high first bid does not automatically mean the work is unnecessary, and a low second bid does not automatically mean it is adequate. The sewer scope video is the evidence that helps you compare the proposals. Keep the original file, preserve the timestamps, and use the recording to ask focused questions instead of relying on a few screenshots.

This is especially important when a seller is deciding whether to repair a sewer line, offer a credit, reduce the price, or leave the issue for the buyer. A still image may show a defect, but a video can show its location, length, movement, water flow, pipe material, and surrounding conditions. Timestamps help connect the visible condition to the written estimate.

Why should you keep the original sewer scope video?

The original file may contain information that is missing from a compressed text message, cloud preview, or screenshot. It may preserve the date, time, audio explanation, camera counter, distance markings, and the inspector’s comments. Those details can help another plumber or drain professional understand what was observed before preparing a bid.

Save the file in at least two locations. Keep one unedited copy on your computer or an external drive, and another copy in secure cloud storage. Use a clear file name that includes the property address or a neutral identifier, the inspection date, and the word “original.” For example, Property-Sewer-Scope-2025-04-18-Original.mp4.

Do not trim, add music, change the speed, or write over the original. If you need a shorter clip for an email, create a copy and label it “excerpt.” The original should remain untouched.

What can timestamps show that still photographs cannot?

A timestamp can identify where a condition appears in the run. Depending on the camera system, the counter may show distance from the access point, elapsed time, or both. A timestamp does not prove a precise measurement by itself, but it gives the reviewer a repeatable place to look.

For example, a video may show normal-looking pipe at one point, standing water later, and a root intrusion farther along. The sequence may help distinguish an isolated defect from a broader line condition. It may also show whether the camera reached the public connection, a property boundary, a cleanout, or another endpoint.

Still images are useful for highlighting a particular defect. They are less useful when separated from the surrounding footage. A seller or contractor who sees only one image may not know whether it represents a short section, a long section, a recurring condition, or a camera obstruction.

How should you review the video before requesting a seller response?

Watch the entire file once without stopping. Then watch it again and create a simple issue log. Record the timestamp or camera distance, what appears on screen, the apparent location, and the question it raises.

Timestamp or distance Observed condition Question for the professional
00:04:30 or 35 feet Standing water or slow movement Is this consistent with a grade issue, blockage, or camera position?
00:07:10 or 58 feet Roots or visible intrusion Is the condition localized, and what repair method is appropriate?
00:10:45 or 86 feet Camera stops or cannot pass What prevents further inspection, and what access is needed?

Use neutral descriptions. “The video appears to show roots at approximately 58 feet” is more useful than “the entire sewer is destroyed.” Avoid conclusions that the footage cannot support.

What information should the sewer scope report include?

Ask for the written report that accompanies the video. It should identify the inspection date, property or inspection location, access point, direction of travel, apparent pipe material if known, areas viewed, limitations, and the inspector’s findings. It should also explain whether the camera reached the intended endpoint.

Look for a description of the observed condition rather than only a repair recommendation. A report that says “repair needed” may not provide enough detail for competing contractors. A useful report generally connects the condition to a location and explains what the inspector could and could not see.

If the report and video appear inconsistent, ask the inspector to clarify. For example, the report may describe a blockage while the video shows the camera stopping before the suspected location. That difference does not necessarily make the inspection invalid, but it should be addressed before anyone relies on the conclusion.

How can timestamps help compare competing sewer bids?

Send each qualified contractor the same evidence package. Include the original video or a view-only copy, the written report, the access-point information, and a list of questions. Ask each contractor to identify the timestamp or distance supporting the proposed work.

Compare the scope of work, not just the total price. One bid may include a short spot repair. Another may include excavation, replacement of a longer section, cleanout installation, traffic control, restoration, permits, testing, or disposal. A third may recommend another diagnostic step before repair.

Ask each bidder to separate included work from excluded work. Request a written explanation of assumptions such as pipe depth, access, soil conditions, landscaping, paving, interior access, utility conflicts, and restoration. These factors can affect the final cost without proving that a contractor is acting improperly.

When discussing money, use a local comparison range rather than treating the first proposal as the market price. Obtain multiple written bids from appropriately qualified professionals and compare the median or typical local range for the same scope. Confirm current pricing, licensing, permitting, and restoration expectations locally because costs vary substantially by location and site conditions.

What should you ask when the first bid is much higher?

Ask the bidder to explain the specific assumptions behind the price. Useful questions include:

  • Which timestamp or distance supports the recommended repair?
  • What length of pipe is included?
  • Is the price for an excavation, a trenchless method, a spot repair, cleaning, or another service?
  • Does the proposal include locating the defect before work begins?
  • Are permits, inspection, engineering, traffic control, and restoration included or excluded?
  • What conditions could increase the price?
  • What work is recommended now, and what work can be monitored?
  • What warranty or workmanship terms are offered in writing?

A professional should be able to explain why the proposed scope matches the video and report. You are not required to select the lowest bid. The goal is to understand whether the higher bid reflects a larger or more complete scope, a different repair method, difficult access, more extensive restoration, or an unsupported recommendation.

How should you make a seller request using the video?

Keep the request factual, limited, and easy to evaluate. Attach or provide access to the report and identify the key timestamps. State what you want the seller to consider, such as a qualified evaluation, a defined repair, a credit, or another negotiated solution. The appropriate request depends on the contract, the inspection period, local practice, and the parties’ agreement.

A concise request might say:

The sewer scope video appears to show a condition at approximately 58 feet, with a second concern near the end of the inspected run. The attached report and video identify the access point and limitations. We obtained written proposals from qualified local contractors. Please review the enclosed materials and consider a seller response based on a comparable scope of work, subject to appropriate verification and any required approvals.

Refer to the evidence instead of overstating it. Say “the video appears to show” when the footage is not definitive. If the camera did not reach the property line or public connection, say so. Transparency can make the request more credible and helps prevent the seller from assuming that the buyer is presenting a complete diagnosis when the inspection had limits.

Should you send the entire video or only selected clips?

When practical, offer the complete original file or a secure view-only copy, along with a short timestamp index. Selected clips can focus attention, but they can also look incomplete if the recipient cannot review the surrounding footage.

If the file is too large for email, use a secure transfer method accepted by the parties or their representatives. Do not post a private inspection file publicly. Keep the original file available in case another professional needs to review it.

A timestamp index can make a long video easier to use:

  • 00:02:15: Access point and initial pipe condition.
  • 00:05:40: Apparent standing water or change in grade.
  • 00:08:05: Roots or other visible intrusion.
  • 00:11:20: Camera limitation or endpoint.

What if a contractor says the video is not enough?

That may be a reasonable limitation. A sewer scope shows the interior of the line from the camera’s path. It may not show pipe depth, conditions outside the pipe, the full exterior connection, soil movement, structural support, or the cause of a symptom. A camera may also be unable to pass a blockage, tight bend, collapsed section, or other obstruction.

Ask what additional information is needed and why. The contractor may recommend locating the line, cleaning it before another scope, accessing a different cleanout, performing a separate test, or obtaining another professional opinion. Request the recommendation in writing and ask whether the additional step changes the proposed repair.

Do not pressure a contractor to make a definite conclusion from footage that does not support one. A careful limitation is more useful than an overly certain diagnosis.

How do sewer lines differ from septic systems?

A municipal sewer connection and a private septic system involve different components and responsibilities. A sewer scope may inspect a building sewer or private lateral, while a septic evaluation may also require review of the tank, distribution components, drainfield, access, maintenance history, and site conditions.

If the property uses septic, do not assume that a sewer camera video answers every important question. Use the EPA septic information as general background and confirm the applicable inspection, disclosure, permit, and maintenance expectations with local authorities and qualified septic professionals. Local requirements and accepted practices can vary.

What should you do if the seller rejects the first request?

Ask for the reason in writing if appropriate. The seller may dispute the condition, question the bid, prefer another contractor, decline to make repairs, or propose a different response. A rejection does not resolve the underlying technical issue, so preserve the video and continue evaluating the property under the applicable contract deadlines.

Consider whether a neutral, qualified professional can review the same footage for a limited opinion. Provide the original report and disclose the access point and inspection limitations. If the parties are negotiating, keep the technical question separate from the business decision. First determine what condition is reasonably supported. Then decide whether the proposed credit, repair, price change, or termination option fits the transaction documents and local advice.

Consult your real estate professional, attorney, inspector, or other appropriate adviser about contract rights and deadlines. This article does not determine whether a seller must repair or disclose a condition.

How can you avoid overstating what the video proves?

Use precise language. A video may show a visible defect, but it may not establish the exact cause, legal responsibility, remaining service life, or final repair cost. Avoid phrases such as “guaranteed failure,” “code violation,” or “full replacement required” unless a qualified professional has made that determination and the statement is supported by applicable local information.

Also avoid claiming that one bid is fraudulent merely because it is higher. Price differences can result from access, crew size, equipment, restoration, insurance, warranty terms, scope, and risk. Ask for an itemized explanation and compare equivalent proposals.

What is the best recordkeeping checklist?

Keep a complete file containing:

  • The original sewer scope video.
  • A backup copy and the date it was saved.
  • The written inspection report.
  • The inspector’s business and contact information.
  • Access-point and direction-of-travel notes.
  • The timestamp index.
  • All written bids and versions of the proposed scope.
  • Questions sent to contractors and their responses.
  • Seller communications and negotiation deadlines.
  • Notes about any limitations, cleaning, retesting, or additional evaluations.

Keep communications professional and factual. Avoid editing the file to make the condition appear worse or better. If a new scope is performed after cleaning or another access point is used, preserve that file separately and identify the circumstances.

When should you obtain another sewer scope?

Consider another scope when the first inspection did not reach the relevant endpoint, the camera was blocked, the footage is unclear, the pipe was cleaned afterward, or competing professionals disagree about what is visible. A second inspection is most useful when it answers a defined question rather than simply producing another video.

Before authorizing the work, ask what will be different. The professional may use another access point, inspect in the opposite direction, document the distance more clearly, or perform the inspection after cleaning. Confirm the expected deliverable, including whether you will receive the video, written findings, limitations, and any locating information.

What is the practical takeaway for a high first bid?

Do not discard the sewer scope because the first estimate is uncomfortable. Preserve the original video, mark the timestamps, request comparable written bids, and ask each professional to connect the proposed work to the footage. Use the video as a shared reference point for a seller request rather than treating a single still image or price as the entire case.

The strongest request is usually specific and measured. It identifies the observed condition, acknowledges limitations, provides a reasonable local comparison range, and asks for a defined response. Confirm technical, contractual, permitting, and septic-related questions locally before relying on the result.

Want this mapped for your actual house?

Free exclusion plan: the entry map, the timing for your state, the honest cost picture, and a vetted local introduction when we have one near you. Independent diagnostic advice, transparent public cost data, and vetted operator matching.

Disclaimer: SewerScoped is an independent educational guide and referral resource. All information is provided for planning and informational purposes. Consult licensed local professionals and regulatory authorities before undertaking construction, repairs, or agreements.

B

sewerscoped Editorial Team

The SewerScoped editorial team writes sourced field guides. Confirm rules at the agency that decides them.

Related guides